Extend the life of your flash teacher stamps with this refill ink which can be used to replenish stampers approximately 10-20 times. >
Bottle contains 10ml refill inkSuitable for all Stakz (layer), EA, CC64 and DM6 coded stamps and square 'Flash' stamps - if in doubt please call.
Value Stamp refill instructions: Remove black stamp section from holder. Use the indented lugs if needed to lever on.Shake bottle wellAdd 7-9 drops to small funnel/hole on the top of the stamp. Repeat as necessary to apply all 7-9 drops of inkReassemble the stamp by positioning the black section in the mount and pushing firmly until it clicks into place on both sidesRe-inking times vary by colour but generally the stamp will be ready for use within 2-3 hours. Otherwise please leave overnight.
Round 22mm (Deskmate) Stamp refill instructions: Holding tightly to the base of the stamp (with base cover on) pull apart the coloured neck of the stampShake bottle wellAdd 7-9 drops to small funnel/hole on the top of the stamp. Repeat as necessary to apply all the 7-9 drops of inkReassemble the stamp by replacing the stamp neck - push until you hear a 'click'Re-inking times vary by colour but generally the stamp will be ready for use within 2-3 hours. Otherwise please leave overnight.
Square Xstamper Flash Stamp refill instructions: Holding tightly to the base of the stamp (with base cover on) pull off the top, coloured cover - this contains the stamp labelShake bottle wellAdd 4 drops to each of the small holes on the top of the stamp. Repeat as necessary to apply all the 7-9 drops of inkReassemble the stampRe-inking times vary by colour but generally the stamp will be ready for use within 2-3 hours. Otherwise please leave overnight.
Stakz Layer Stamp refill instructions: Separate the layer and place face down (covered)Shake bottle wellAdd 4 drops to the long hole exposed on the top side of the stampReassemble the stampRe-inking times vary by colour but generally the stamp will be ready for use within 2-3 hours. Otherwise please leave overnight.